EFECTO DEL TRATAMIENTO TÉRMICO EN LA CAPACIDAD FERMENTATIVA DE HARINAS DE AVENA, MAÍZ Y SORGO PARA SER UTILIZADAS EN LA SUSTITUCIÓN DE HARINA DE TRIGO

Autores/as

  • Francisco Vásquez Lara Departamento de Tecnología de Alimentos. Universidad Politécnica de Valencia, CP 46022, Valencia, España Departamento de Tecnología de Alimentos de Origen Vegetal. Centro de Investigación en Alimentación y Desarrollo, A.C., CP 83304, Hermosillo, Sonora, México
  • Samuel Verdú Amat Departamento de Tecnología de Alimentos. Universidad Politécnica de Valencia, CP 46022, Valencia, España
  • Alma Rosa Islas Rubio Departamento de Tecnología de Alimentos de Origen Vegetal. Centro de Investigación en Alimentación y Desarrollo, A.C., CP 83304, Hermosillo, Sonora, México
  • Benjamín Ramírez Wong Departamento de Investigación y Posgrado en Alimentos. Universidad de Sonora, CP 83000, Hermosillo, Sonora, México
  • Jose Manuel Barat Baviera Departamento de Tecnología de Alimentos. Universidad Politécnica de Valencia, CP 46022, Valencia, España
  • Raúl Grau Meló Departamento de Tecnología de Alimentos. Universidad Politécnica de Valencia, CP 46022, Valencia, España

DOI:

https://doi.org/10.18633/biotecnia.v21i1.812

Palabras clave:

Harina de trigo, tratamiento térmico, sustitución, perfil de viscosidad, capacidad fermentativa

Resumen

Una parte importante del proceso de panificación es la fermentación. El objetivo fue evaluar el efecto de la temperatura (80, 100 o 130 °C) sobre la capacidad fermentativa de las harinas de avena (HA), maíz (HM) o sorgo (HS) al utilizarse en la sustitución de harina de trigo (HT) a niveles de 10 o 20 %. Se determinó la distribución del tamaño de partícula, capacidad de retención de agua (CRA), y perfil de viscosidad de las harinas utilizando el RVA (Rapid Visco Analyser) y la capacidad fermentativa (medida como volumen de la masa) después de una hora de fermentación. La CRA se vio favorecida cuando se utilizó HA al 20 % tratada térmicamente a 100 °C. Parámetros de viscosidad: temperatura de empaste, viscosidad pico y final fueron afectados al tratar térmicamente las harinas. Estos efectos fueron más notorios al ser sometidas a 130 °C. La capacidad fermentativa mejoró considerablemente cuando se utilizó HA al 20 % (163.93 cm3) tratada a 100 °C, incluso mayor a la alcanzada por HT (136.32 cm3). La utilización de HM y HS al 10% tratada a 130 °C también favoreció este parámetro, sin embargo, no al nivel alcanzado por HT.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

AACC, 2000. Approved Methods of American Association of Cereal Chemists. 10th Ed. The Association, St. Paul, MN, USA. Methods 56-11, 76-21.

Alvis, A., Vélez, C.A., Villada, H.S. y Rada-Mendoza, M. 2008. Análisis físico-químico y morfológico de almidones de ñame, yuca y papa y determinación de viscosidad de las pastas. Información Tecnológica Vol. 19 (1), 19-28.

Batey, I.L. 2000. Interactions of starch with glutens having different glutenin sub-units. In: Wheat Gluten. P.R. Shewry and A.S. Tatham, Eds. Royal Society. Pp. 499-502.

Berton, B., Scher, J., Villieras, F. y Hardy, J. 2002. Measurement of hydration capacity of wheat flour: Influence of composition and physical characteristics. Powder Technology (128) 326- 331.

Bucsella, B., Takács, Á., Vizer, V., Schwendener, U. y Tömösközi, S. 2016. Comparison of the effects of different heat treatment processes on rheological properties of cake and bread wheat flours. Food Chemistry (190) 990-996.

Bushuk, W. y I. Hilnka, I. 1964. Water as a constituent of flour, dough, and bread. Baker’s Dig. (38) 43-46. Bushuk, W. 1966. Distribution of water in dough and bread. Baker’s Dig. 40 (5) 38-40.

Ferreras-Charro, R. 2009. Análisis reológico de las diferentes fracciones de harina obtenidas en la molienda del grano de trigo. Tesis Ingeniería Técnica Agrícola. Universidad de Salamanca, España.

Haynes, L.C., Bettge, A.D. y Slade, L. 2009. Soft wheat and flour products methods review: Solvent retention capacity equation correction. AACC International Report (54) 174-175.

Hung, P.V. y Morita, N. 2004. Dough properties and bread quality of flour supplemented with cross-linked corn starches. Food Research International (37) 461-467.

Hüttner, E.K., Dal Bello, F. y Arendt, E.K. 2010. Rheological properties and bread making performance of commercial wholegrain oat flours. Journal of Cereal Science (52) 65-71.

Imberty, A., Chanzy, H., Pérez, S., Bulèon, A. y Tran, V. 1988. The double helical nature of the crystalline part of A-starch. Journal of Molecular Biology Vol. 201 (2) 365-378.

Jelaca, S.L. y Hlynka, I. 1971. Water-binding capacity of wheat flour crude pentosans and their relation to mixing characteristics of dough. Cereal Chemistry (48) 211-222.

Kim, W., Choi, S.G. Kerr, W.L., Johnson, J.W. y Gaines, C.S. 2004. Effect of heating temperature on particle size distribution in hard and soft wheat flour. Journal of Cereal Science (40) 9-16.

Labanowska, M., Weselucha-Birczyńska, A., Kurdziel, M. y Puch, P. 2013. Thermal effects on the structure of cereal starches. EPR and Raman spectroscopy. Carbohydrate Polymers (92) 842-848.

Labuza, T.P. y Busk, C.G. 1979. An analysis of the water binding in gels. Journal of Food Science (44) 1379-1385.

Larsen, R.A. 1964. Hydration as factor in bread quality. Cereal Chemistry (41) 181-187.

Lazaridou, A. y Biliaderis, C.G. 2007. Molecular aspects of cereal β-glucan functionality: Physical properties, technological applications and physiological effects. Journal of Cereal Science (46) 101-118.

Lee, W.J., Pedersen, J.F. y Shelton, D.R. 2002. Relationship of sorghum kernel size to physiochemical, milling, pasting, and cooking properties. Food Research International (35) 643-649.

Londono, D.M., Gilissen, Luud J.W.J., Visser, Richard, G.F., Smulders, Marinus, J.M. y Hamer, R.J. 2015. Understanding the role of oat β-glucan in oat-based dough systems. Journal of Cereal Science (62) 1-7.

Marston, K., Khouryieh, H. y Aramouni, F. 2016. Effect of heat treatment of sorghum flour on the functional properties of gluten-free bread and cake. LWT-Food Science and Technology (65) 637-644.

Neill, G., Al-Muhtaseb, A.H. y Magee, T.R.A. 2012. Optimisation of time/temperature treatment, for heat treated soft wheat flour. Journal of Food Engineering (113) 422-426.

Ozawa, M., Kato, Y. y Seguchi, M. 2009. Investigation of dry-heated hard and soft wheat flour. Starch-Stärke 61, 398-406.

Rasper, V.F. y DeMan, J.M. 1980. Effect of granule size of substituted starches on the rheological character of composite doughs. Cereal Chemistry (57) 331-340.

Sahin, S. 2008. Cake batter rheology. In: Sumnu, S.G., Sahin, S. (Eds.), Food Engineering Aspects of Baking Sweet Goods. CSR Press, Boca Ratón, Florida, USA.

Shittu, T.A., Raji, A.O. y Sanni, L.O. 2007. Bread from composite cassava-wheat flour: I. Effect of baking time and temperature on some physical properties of bread loaf. Food Research International (40) 280-290.

Soleimani Pour-Damanab, A.R., Jafary, A. y Rafiee, Sh. 2011. Monitoring the dynamic density of dough during fermentation using digital imaging method. Journal of Food Engineering (107) 8-13.

Tadeu-Paraginski, R., Levien-Vanier, N., Berrios, J.J., De Oliveira, M. y Cardoso-Elias, M. 2014. Physicochemical and pasting properties of maize as affected by storage temperature. Journal of Stored Products Research (59) 209-214.

Villarino, C.B.J., Jayasena, V. Coorey, R., Chakrabarti-Bell, S. y Johnson, S.K. 2015. The effects of Australian sweet lupin (ASL) variety on physical properties of flours and breads. LWT-Food Science and Technology (60) 435-443.

Descargas

Publicado

2018-12-23

Cómo citar

Vásquez Lara, F., Verdú Amat, S., Islas Rubio, A. R., Ramírez Wong, B., Barat Baviera, J. M., & Grau Meló, R. (2018). EFECTO DEL TRATAMIENTO TÉRMICO EN LA CAPACIDAD FERMENTATIVA DE HARINAS DE AVENA, MAÍZ Y SORGO PARA SER UTILIZADAS EN LA SUSTITUCIÓN DE HARINA DE TRIGO. Biotecnia, 21(1), 45–53. https://doi.org/10.18633/biotecnia.v21i1.812

Número

Sección

Artículos originales

Métrica

Artículos más leídos del mismo autor/a

Artículos similares

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >> 

También puede Iniciar una búsqueda de similitud avanzada para este artículo.