Controlled preparation and chemical actuation of polyacrylonitrile fibers
DOI:
https://doi.org/10.18633/biotecnia.v25i3.2122Keywords:
Microfabrication; Microfiber; Polyacrylonitrile; Chemical ActuationAbstract
Pure polyacrylonitrile (PAN) fibers with diameter size at micrometric scale were obtained and collected radially using an immersion-jet wet spinning .system. This technique is a fast and easy approach to fabricate micrometric PAN fibers. The diameter of the fiber can be easily controlled by adjusting the size of the spinneret. Uniform, smooth and continuous PAN microfibers were suitable modified by thermal stabilization and alkaline saponification to obtain pH-sensitive fibers. The effect of diameter size fiber on the chemical actuation behavior was investigated in terms of length change characteristics under the influence of pH solution. The microfibers showed expanding/contracting behavior and force generation stimulated by changes in the environment pH. The fibers structural and chemical properties were characterized using the FT-IR spectroscopy and SEM microscopy techniques.
Downloads
References
Brandrup, J. y Peebles, L. H., (1968). On the chromophore of polyacrylonitrile. IV. thermal oxidation of polyacrylonitrile and other nitrile-containing compounds. Macromolecules. 1(1), 64–72.
Choe, K. y Kim, K. J., (2006). Polyacrylonitrile linear actuators: chemomechanical and elec-tro-chemomechanical properties. Sensors and Actuators A: Physical. 126(1), 165–172.
Doi, M., Matsumoto, M. y Hirose, Y., (1992). Deformation of ionic polymer gels by electric fields. Macromolecules. 25(20), 5504–5511.
Farsani, R. E., Raissi, S., Shokuhfar, A. y Sedghi, A., (2009). FT-IR study of stabilized PAN fibers for fabrication of carbon fibers. International Journal of Mechanical and Mechatronics Engineering. 3(2), 161–164.
Feng, J., Zhang, C., Feng, J., Jiang, Y. y Zhao, N., (2011). Carbon aerogel composites prepared by am-bient drying and using oxidized polyacrylonitrile fibers as reinforcements. ACS Applied Materials & Interfaces. 3(12), 4796–4803.
Frank, E., Hermanutz, F. y Buchmeiser, M. R., (2012). Carbon fibers: precursors, manufacturing, and properties. Macromolecular Materials and Engineering. 297(6), 493–501.
Friedlander, H. N., Peebles, L. H., Brandrup, J. y Kirby, J. R., (1968). On the chromophore of polyacry-lonitrile. VI. mechanism of color formation in polyacrylonitrile. Macromolecules. 1(1), 79–86.
Gu, S. Y., Ren, J. y Wu, Q. L., (2005). Preparation and structures of electrospun PAN nanofibers as a precursor of carbon nanofibers. Synthetic Metals. 155(1), 157–161.
Kalashnik, A. T., Smirnova, T. N., Chernova, O. P. y Kozlov, V. V., (2010). Properties and structure of polyacrylonitrile fibers. Polymer Science Series A. 52(11), 1233–1238.
Lee, S. J., Lee, D. Y., Song, Y. S. y Cho, N. I., (2007). Chemically driven polyacrylonitrile fibers as a linear actuator. Solid State Phenomena. 124-126, 1197–1200.
Liu, H. C., Chien, A.-T., Newcomb, B. A., Liu, Y. y Kumar, S., (2015). Processing, structure, and prop-erties of lignin- and cnt-incorporated polyacrylonitrile-based carbon fibers. ACS Sustainable Chemistry & Engineering. 3(9), 1943–1954.
Liu, J.-J., Ge, H. y Wang, C.-G., (2006). Modification of polyacrylonitrile precursors for carbon fiber via copolymerization of acrylonitrile with ammonium itaconate. Journal of Applied Polymer Sci-ence. 102(3), 2175–2179.
Mahmod, D. S. A., Ismail, A. F., Mustafa, A., Ng, B. C. y Abdullah, M. S., (2011). Effect of the solvent type on the formation and physical properties of polyacrylonitrile fibers via a solvent-free coagula-tion bath. Journal of Applied Polymer Science. 121(4), 2467–2472.
Mirbaha, H., Arbab, S., Zeinolebadi, A. y Nourpanah, P., (2013). An investigation on actuation behavior of polyacrylonitrile gel fibers as a function of microstructure and stabilization temperature. Smart Materials and Structures. 22(4), 045019.
Papkov, D., Beese, A. M., Goponenko, A., Zou, Y., Naraghi, M., Espinosa, H. D., Saha, B., Schatz, G. C., Moravsky, A., Loutfy, R., Nguyen, S. T. y Dzenis, Y., (2012). Extraordinary improvement of the graphitic structure of continuous carbon nanofibers templated with double wall carbon nanotubes. ACS Nano. 7(1), 126–142.
Rahaman, M. S. A., Ismail, A. F. y Mustafa, A., (2007). A review of heat treatment on polyacrylonitrile fiber. Polymer Degradation and Stability. 92(8), 1421–1432.
Samatham, R., Park, I.-S., Kim, K. J., Nam, J.-D., Whisman, N. y Adams, J., (2006). Electrospun na-noscale polyacrylonitrile artificial muscle. Smart Materials and Structures. 15(6), N152—N156.
Schreyer, H. B., Gebhart, N., Kim, K. J. y Shahinpoor, M., (2000). Electrical activation of artificial muscles containing polyacrylonitrile gel fibers. Biomacromolecules. 1(4), 642–647.
Sedghi, A., Farsani, R. E. y Shokuhfar, A., (2008). The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties. Journal of Materials Processing Tech-nology. 198(1-3), 60–67.
Shi, X.-L., Hu, Q., Wang, F., Zhang, W. y Duan, P., (2016). Application of the polyacrylonitrile fiber as a novel support for polymer-supported copper catalysts in terminal alkyne homocoupling reactions. Journal of Catalysis. 337, 233–239.
Shi, X.-L., Tao, M., Lin, H. y Zhang, W., (2014). Application of the polyacrylonitrile fiber as a support for the green heterogeneous base catalyst and supported phase-transfer catalyst. RSC Adv. 4(109), 64347–64353.
Shiga, T. y Kurauchi, T., (1990). Deformation of polyelectrolyte gels under the influence of electric field. Journal of Applied Polymer Science. 39(1112), 2305–2320.
Sidorina, A. I. y Druzhinina, T. V., (2016). Macrostructure of polyacrylonitrile nanofibers produced by electrospinning. Fibre Chemistry. 47(5), 362–366.
Sreekumar, T. V., Liu, T., Min, B. G., Guo, H., Kumar, S., Hauge, R. H. y Smalley, R. E., (2004). Poly-acrylonitrile single-walled carbon nanotube composite fibers. Advanced Materials. 16(1), 58–61.
Wang, P. H., Liu, J. y Li, R. Y., (1994). Physical modification of polyacrylonitrile precursor fiber: its effect on mechanical properties. Journal of Applied Polymer Science. 52(12), 1667–1674.
Wu, H.-l., Bremner, D. H., Li, H.-y., Shi, Q.-q., Wu, J.-z., Xiao, R.-q. y Zhu, L.-m., (2016). A novel multifunctional biomedical material based on polyacrylonitrile: preparation and characterization. Materials Science and Engineering: C. 62, 702–709.
Yördem, O. S., Papila, M. y Menceloğlu, Y. Z., (2008). Effects of electrospinning parameters on poly-acrylonitrile nanofiber diameter: an investigation by response surface methodology. Materials & Design. 29(1), 34–44.
Zhao, R., Wang, Y., Li, X., Sun, B., Li, Y., Ji, H., Qiu, J. y Wang, C., (2016). Surface activated hydro-thermal carbon-coated electrospun PAN fiber membrane with enhanced adsorption properties for herbicide. ACS Sustainable Chemistry & Engineering. 4(5), 2584–2592.
Additional Files
Published
How to Cite
Issue
Section
License
Copyright (c) 2023
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The journal Biotecnia is licensed under the Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) license.
_(1)_(1).png){kind=spacer}
_(2).jpg)
